CT Od Mounted Pipe Facing Machine

• Customization: Available
• Warranty: 1-year
• Certification: CE, ISO 9001:2000, ISO 9001:2008
• Model NO.: CT
• Condition: New
• Control: Automatic
• Application: Metal, Plastic
• Power Source: Electric
• Cutting Model: Blade Cutting
• Beveling Angle: 0,30,37.5 Degree
• Motor Brand: Electric
• Beveling Type: Cold
• Transport Package: Tool Box
• Trademark: Watt
• Origin: China
• HS Code: 846190
• Production Capacity: 500

Product Description

Pipe & Flange ~ Cutting ~ Beveling ~ Facing ~ Drilling ~ Boring

CT OD MOUNTED PIPE FACING MACHINE

OVERVIEW 

CT pipe facing machine was designed for pipe end facing and beveling with small diameter and thin-wall thickness. OD mounted, equipped with special collect and tool, easy installation, fast and efficient processing. It is small in size, light in weight and easy to carry. It is suitable for facing and beveling of pipe end in electronics, pharmaceutical, food, beverage, solar energy, semiconductor and chemical industry.

FEATURES

1,Auto feeding, high precision 

2,One collect clamp one size pipe  

3,Driven by electric motor or battery 

4,Cleaning cutting, no water and oil 

5,2 models, working range for pipe OD 3mm-110mm

6,Pipe end asolute vertical,no deformation,no burrs,perfact weld-prep

7,Fast install, fast cutting, one facing only need a few seconds 

8,Can be used for alloy steel, carbon steel, stainless steel and aluminum

SPECIFICATION

Model	PFM-1.0	PFM-1.0A	PFM-4.0A
Drive	Battery	Electric motor	Electric motor
Range	Φ3-25.4mm	Φ3-25.4mm	Φ12.7-110mm
Tool stroke	5mm	5mm	5mm
thickness	0.5-3mm	0.5-3mm	0.5-5mm
No-load rotating	300rpm	300rpm	300rpm
Voltage	14.4v	220v	220v
Power	-	1.3kw	1.3kw
Net Weight	2.3kg	4.8kg	19kg

Standard with four diameter clamping block, more specifications please inquire

Above parameters just for reference only, not acceptance criteria

TOOLING

2pcs facing tool

Material:Cermet or Carbide

Beveling tool optional

 

Order Guide
Before you place order to us, please let us know the following information:

• Choose the right ModelConfirm the beveling angel required
• Confirm the welding joint required (U, V, Double V or Compound preparation)
• Advise your pipe material ( Carbon steel, stainless steel or others)
• Other special demands about machine
• The spare parts needed
•  

Method of operation:
1. Measure the size of the pipe to be machined, select the swelling block according to the swelling block diagram, install it on the wedge block, tighten the bolt, make sure it is secure and loose.
2. According to the processing requirements, select the tool table in the appropriate angle of the tool, installed in the machine cutter, tighten the bolt, fixed tool.
3. Rotate the feed hand wheel to extend the feed spindle.
4. Make the machine tightening mechanism into the tube, the cutter head and pipe surface should be left enough feed space.
5. Rotate the hand wheel and adjust the machine position to ensure that the machine feeds the spindle coaxial with the center of the tube. Tighten the nut on the hand wheel with a wrench.
6. Start the motor, rotate the feed handwheel, the blade is in contact with the pipe wall, and groove.
7. After finishing the machining, first exit the tool, then release the tightening mechanism, remove the machine from the tube.